F065
Diameter Nominal Pipa Njaba:
- Disaranake dening Standar Perusahaan Peralatan Kriogenik HL. Uga bisa diprodhuksi miturut kabutuhan pelanggan.
- Tekanan Desain:
- Disaranake ≤ 16 bar. Utawa pilih Jinis Sambungan Las (≤40 bar).
- Bahan Pipa Njaba
Tanpa syarat khusus, bahan pipa njero lan pipa njaba bakal dipilih padha.
3.1.3 Jinis Sambungan Las
odel
Koneksi
Tipe
Diameter Nominal Pipa Jero
Tekanan Desain
Bahan
saka Pipa Jero
Standar
Cathetan
W010
00X
Jinis Sambungan Dilas kanggo Selang Fleksibel Berinsulasi Vakum Statis
DN10, 3/8"
8 ~ 40 bar
Baja Tahan Karat Seri 300
ASME B31.3
| V | DN20, 3/4" | DN25, 1" | Diameter Nominal Pipa Njaba: | |
| Tekanan Desain | Bahan Pipa Jero. | A iku 304, | DN40, 1-1/2" | C iku 316, |
| D yaiku 316L, | HLHS | HLHS | W015 | 00X |
| DN15, 1/2" | No | No | HLHS | Tekanan Desain |
| Nominal Diameter of Inner Pipe | 00X | HLHS | W025 | 00X |
| Design Pressure | HLHS | DN32, 1-1/4" | 00X | DN32, 1-1/4" |
| HLHS | HLHS | HLHS | DN40, 1-1/2" | HLHS |
| Disaranake ≤ DN25 utawa 1". Utawa milih Jinis Sambungan Bayonet Vakum nganggo Flensa lan Baut (saka DN10, 3/8" nganti DN80, 3"), Jinis Sambungan Dilas (saka DN10, 3/8" nganti DN150, 6") | 00X | |||
| DN50, 2" | HLHS | |||
| Material | 300 Series Stainless Steel | |||
| Standar | LN2HLHS2W080 | |||
00X
DN80, 3"
| LHSW100 | |
| 00X | |
| DN100, 4" |  |
LHSW125
| 00X | DN125, 5" | LHSW150 | 00X | DN150, 6" | Diameter Nominal Pipa Njaba: |
| Disaranake dening Standar Perusahaan Peralatan Kriogenik HL. Uga bisa diprodhuksi miturut kabutuhan pelanggan. | Bahan Pipa Njaba | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" |
| Tipe | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| Standar | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| DN10, 3/8" | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| Tekanan Desain. | / | DN25, 1" | DN25, 1" | / | |
| Bahan Pipa Jero. | / | DN25, 1" | DN25, 1" | / | |
| C iku 316, | / | DN25, 1" | DN25, 1" | / | |
| HLHS | / | DN25, 1" | DN25, 1" | / | |
| DN15, 1/2" | / | DN25, 1" | DN25, 1" | / | |
| 00X | / | / | DN25, 1" | / | |
| HLHS | / | / | DN25, 1" | / | |
| 00X | / | / | DN25, 1" | / |
Diameter Nominal Pipa Jero:
| Disaranake ≤ DN25 utawa 1". Utawa milih Jinis Sambungan Bayonet Vakum nganggo Flensa lan Baut (saka DN10, 3/8" nganti DN80, 3"), Jinis Sambungan Dilas (saka DN10, 3/8" nganti DN150, 6") | Diameter Nominal Pipa Njaba: |
| Disaranake dening Standar Perusahaan Peralatan Kriogenik HL. Uga bisa diprodhuksi miturut kabutuhan pelanggan. | Tekanan Desain: |
| Disaranake ≤ 16 bar. Utawa pilih Jinis Sambungan Las (≤40 bar) | Bahan Pipa NjabaTanpa syarat khusus, bahan pipa njero lan pipa njaba bakal dipilih padha.3.2 Sistem Pipa Berinsulasi Vakum Dinamis3/S |
| 3.2.1 Jinis Sambungan Bayonet Vakum nganggo Klem | odel |
| Koneksi | Tipe |
| Diameter Nominal Pipa Jero | Tekanan Desain |
| Bahan | saka Pipa Jero |
| Standar | Cathetan |
HDB01008
Jinis Sambungan Bayonet Vakum nganggo Klem kanggo Selang Fleksibel Berinsulasi Vakum Dinamis
lDN10, 3/8"
l8 bar
| Baja Tahan Karat Seri 300 C iku 316, | Bahan Pipa Jero. | |
| A iku 304, | B yaiku 304L,C iku 316,D yaiku 316L, | |
| E iku liyane. | HLH | DB01508 |
| DN15, 1/2" | Tekanan Desain: | Tekanan Desain: |
| DN20, 3/4" | Tekanan Desain: | Tekanan Desain: |
| DN25, 1" | Tekanan Desain: | Tekanan Desain: |
| Diameter Nominal Pipa Njaba: | Tekanan Desain: | Tekanan Desain: |
Disaranake ≤ 8 bar. Utawa pilih Jinis Sambungan Bayonet Vakum nganggo Flensa lan Baut (≤16 bar), Jinis Sambungan Dilas (≤40 bar)Bahan Pipa NjabaTanpa syarat khusus, bahan pipa njero lan pipa njaba bakal dipilih padha.
Kondisi Daya:
HL-HX-X-Situs kasebut kudu nyedhiyakake daya menyang pompa vakum lan ngandhani HL Cryogenic Equipment babagan informasi listrik lokal (Tegangan lan Hertz).-00-X
3.2.2 Jinis Sambungan Bayonet Vakum nganggo Flensa lan Baut
odel
Koneksi
Tipe
Diameter Nominal Pipa Jero
Tekanan Desain
Bahan
saka Pipa Jero
Standar
Cathetan
Nominal Diameter of Inner Pipe
00X
8~16 bar
DN10, 3/8"
8~16 bar
Baja Tahan Karat Seri 300
Design Pressure
Tekanan Desain.
08 iku 8bar,
16 iku 16bar.
Bahan Pipa Jero.
A iku 304,
B yaiku 304L,
C iku 316,
D yaiku 316L,
E iku liyane.
F015
00X
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHSF040X | Seri Pemisah Fase Terisolasi Vakum | DN10, 3/8" | Armenia
| 300 Series Stainless Steel | ASME B31.3 | X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| PrancisDiameter Nominal Pipa Njaba:X | DN15, 1/2" | |||||
| PrancisDisaranake ≤ 16 bar. Utawa pilih Jinis Sambungan Las (≤40 bar).X | DN20, 3/4" | |||||
| PrancisKondisi Daya:X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Islandia
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| Prancis08 iku 8bar,00X | lan 25, 32, 40. | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| PrancisWong Samoa00X | DN15, 1/2" | |||||
| PrancisSindhi00X | DN20, 3/4" | |||||
| PrancisWong Tajik00X | DN25, 1" | |||||
| PrancisWong Thailand00X | DN32, 1-1/4" | |||||
| PrancisUzbek00X | DN40, 1-1/2" | |||||
| PrancisBasa Xhosa00X | DN50, 2" | |||||
| PrancisZulu00X | DN65, 2-1/2" | |||||
| PrancisOriya00X | DN80, 3" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3". Or selects the Welded Connection Type (from DN10, 3/8" to DN150, 6"), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8" to DN25, 1").
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Kondisi Daya:
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHS00X00X | DN10, 3/8" | DN10, 3/8" | Baja Tahan Karat Seri 300 | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| PrancisDN15, 1/2"00X | DN15, 1/2" | |||||
| PrancisDN20, 3/4"00X | DN20, 3/4" | |||||
| PrancisDN25, 1"00X | DN25, 1" | |||||
| PrancisW03200X | DN32, 1-1/4" | |||||
| PrancisW04000X | DN40, 1-1/2" | |||||
| PrancisW05000X | DN50, 2" | |||||
| PrancisW06500X | DN65, 2-1/2" | |||||
| PrancisW08000X | DN80, 3" | |||||
| HSelang Jaket Vakum00X | DN100, 4" | |||||
| HKatup Pengatur Aliran Oksigen Cair Cina00X | DN125, 5" | |||||
| HRega Grosir China China Tangki Standar ISO 2...00X | DN150, 6" |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHSSistem Pompa Vakum Dinamis00X | Seri Pemisah Fase Terisolasi Vakum | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| PrancisWhatsapp00X | DN15, 1/2" | |||||
| PrancisWeChat00X | DN20, 3/4" | |||||
| PrancisJerman00X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Yunani
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
basa Denmark
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLLaoX | Vacuum Bayonet Connection Type with Clamps for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | Armenia
| 300 Series Stainless Steel | ASME B31.3 | X:Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHBasa EstoniaX | DN15, 1/2" | |||||
| HLHBasa FrisiaX | DN20, 3/4" | |||||
| HLHBasa GujaratiX | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Islandia
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLMalayalam00X | Wong Maori | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDWong Samoa00X | DN15, 1/2" | |||||
| HLHDSindhi00X | DN20, 3/4" | |||||
| HLHDWong Tajik00X | DN25, 1" | |||||
| HLHDWong Thailand00X | DN32, 1-1/4" | |||||
| HLHDUzbek00X | DN40, 1-1/2" | |||||
| HLHDBasa Xhosa00X | DN50, 2" | |||||
| HLHDZulu00X | DN65, 2-1/2" | |||||
| HLHDOriya00X | DN80, 3" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3". Or selects the Welded Connection Type (from DN10, 3/8" to DN150, 6"), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8" to DN25, 1").
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects Welded Connection Type (≤40 bar).
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHDW01000X | Welded Connection Type for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | 8~40 bar | Stainless Steel 304, 304L, 316, 316L | ASME B31.3 | 00: Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40. .
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDW01500X | DN15, 1/2" | |||||
| HLHDW02000X | DN20, 3/4" | |||||
| HLHDW02500X | DN25, 1" | |||||
| HLHDW03200X | DN32, 1-1/4" | |||||
| HLHDW04000X | DN40, 1-1/2" | |||||
| HLHDW05000X | DN50, 2" | |||||
| HLHDW06500X | DN65, 2-1/2" | |||||
| HLHDW08000X | DN80, 3" | |||||
| HLHDW10000X | DN100, 4" | |||||
| HLHDW12500X | DN125, 5" | |||||
| HLHDW15000X | DN150, 6" |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHDT01000X | Vacuum Bayonet Connection Type with Clamps for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDB01500X | DN15, 1/2" | |||||
| HLHDB02000X | DN20, 3/4" | |||||
| HLHDB02500X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects the, Welded Connection Type (≤40 bar)
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
